Helmet Test Equipment Helmets Anti-Static Tester HZ-8103 GB/T 2812－2006
Equipment Description:
Helmets specifically detect anti-static properties. The safety helmet anti-static tester is suitable for the determination of anti-static properties of safety helmets, engineering plastics, and helmets with anti-static requirements. It can be used by rubber industry, plastic industry, inspection department and scientific research unit
Corresponding standard:
GB/T 2812－2006 GB/T 2811－2007
Technical parameter:
| Model | HZ-8103 |
| Corresponding standard | GB/T 2812－2006 GB/T 2811－2007 |
| High resistance meter indication error | ±1％ |
| Voltage | 100V DC |
Instrument Features
1. It has excellent advantages such as portability and use, wide range, accurate reading and strong shock resistance.
2. Three and a half liquid crystal display, the maximum display 1999.
3. Over limit prompt, when the upper limit is exceeded, the highest digit will display '1', and the other last three digits will not be displayed; when it is below the lower limit, an alarm will sound.
4. The undervoltage symbol is displayed when the battery is undervoltage.
5. Power is supplied by a built-in 6f22 type 9V laminated battery.
testing method
After the helmet is pretreated, stick two electrodes on the flat part of the helmet. The electrodes should be placed in parallel with a distance of 10mm±0.5mm. The electrodes and the helmet should be bonded with conductive glue. The resistance value of the conductive glue Should be <1KΩ; connect the measuring end of the high resistance meter to the electrode, read the resistance value displayed by the high resistance meter; then exchange the electrode to repeat the test once, and record the displayed value; The average of the two measurement readings is the actual measured surface resistance.
